- Home
- Equipment
Refine by
Komax Environmental Equipment & Supplies
138 equipment items found
Manufactured by:Komax Systems, Inc. based inHuntington Beach, CALIFORNIA (USA)
There are a variety of different steels, grades, and alloys that static mixers can be constructed of. Komax custom designs Carbon Steel, and Exotic Metal Alloy Inline, and Stainless Steel Static Mixer sized from ½” to 60” diameters. Metallic alloys, such as Stainless Steel, Hastelloy, Inconel, or Titanium, are excellent for the corrosion resistance properties and can withstand ...
Manufactured by:Komax Systems, Inc. based inHuntington Beach, CALIFORNIA (USA)
The KOMAX Hi-Pass Sludge Mixer is designed to effectively mix polymer solution into sludge flows prior to dewatering process. Polymer savings in excess of 25% can be achieved. The basis for the mixer design is a set of right rotation elements followed by a set of left rotation elements set at 90 degrees from each other. This is a non-clogging static sludge mixer design as the municipal sludges ...
Manufactured by:Komax Systems, Inc. based inHuntington Beach, CALIFORNIA (USA)
The in-stock and custom Komax PVC Static Mixers are designed to suit every application from sizes as small as ½” to as large as 20”. Komax stocks the CPS Series static mixer, which contains 4 Triple Action Static Mixing Elements incased in PVC pipe with MNPT ends. The custom Komax PVC Static Mixer is designed to each unique application, to ensure homogenous mixing across the ...
Manufactured by:Komax Systems, Inc. based inHuntington Beach, CALIFORNIA (USA)
The patented Komax custom Wafer Static Mixer is designed to fit between existing pipe flanges of any specification. This makes the wafer-style static mixer easier for new and retrofit installations when there is limited space available and you are not able to install a traditional static ...
Manufactured by:Komax Systems, Inc. based inHuntington Beach, CALIFORNIA (USA)
One of the biggest problems with Custody Transfer is the ability to distribute the water and bottom sediments across the crude oil pipeline for accurate crude oil sampling and crude oil metering. Water, being heavier than and immiscible with oil, tends to flow on the bottom of the pipeline, where oil will flow above the water. ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
As a universal cutting machine, the Iota 330 Cut & Strip machine cuts endless products such as shrink-fit tubes, compressed-air tubes, wires and plastic straps with precision up to 1000m. The Iota 330 is careful, reliable and easy to use: The belt drive guides the product precisely to the cutting blade. Four-track parallel processing for high quantities is also possible. The closing distance ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Alpha 550 fully automatic wire processing machine ensures high unit cost performance with a wire cross-section of 0.13 – 6 mm² and the best quality in crimping and seal insertion on both sides. Constantly high productivity and flexibility in wire processing are requirements for modern wire assembly. The Alpha 550 offers a competitive advantage thanks to fast processing and, with ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Optimized for high mix production, the Alpha 520 is ideal for customers producing various batch sizes and a wide range of wire lengths, cross sections, and end designs. The fully automatic wire processing machine Alpha 520 can perform customized jobs with unique applications. Its precisely process wire qualities with cross sections from 0.13 – 6 mm² can easily handle even short wires ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter. The Delta 220 semi-automatic crimping machine with manual crimp height adjustment offers highly exact repeatability and process quality thanks to the precise mechanics. CFA/CFA+ crimp force monitoring reliably ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Alpha 565 wire processing machine is suitable for special processing with up to seven process stations and conductor cross-section 0.13 – 6 mm². With seven process stations, the Alpha 565 wire processing machine offers plenty of space for special processing and individual processes. Customer-specific applications are easily and effectively integrated. Thanks to the modular machine ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Gamma 450 - the compact, fully automatic wire processing machine - processes crimps and seals on both sides with a wire cross section of 0.13 –4 mm². The fully automatic Gamma 450 wire processing machine is a compact device for its performance. Thanks to fully integrated, seamless quality monitoring with CFA/CFA+, ACD and Q1250 and optional modules, it can be adapted to high and ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The stripping and crimping machine StripCrimp 208 strips to a length of 0.5 – 15 mm (0.02 – 0.59") and crimps wires from 0.05 – 6 mm² (30 – 10 AWG) with 33 kN (3.3 tons) of force. The StripCrimp 208 combines stripping and crimping for standard wires. With short breakout lengths ranging from 26 mm (1.02") down to 14 mm (0.55"), it can handle sensor applications and ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Uni-M can be used in automatic and semi-automatic benchtop crimping machines, processing banded terminals of open- or closed-barrel construction with metal or plastic carriers. The Uni-M family of applicators is designed for use with side-feed and end-feed wire splice terminals, banded terminals of open- or closed-barrel construction, as well as pre-insulated terminals on plastic or Mylar ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Delta 240 semi-automatic crimping machine with crimp force monitoring offers automatic crimp height adjustment and stripping unit – optionally with bad contact cutter. The Delta 240 semi-automatic crimping-stripping machine with automatic crimp height adjustment offers highly exact repeatability and process quality thanks to its precise mechanics. CFA/CFA+ crimp force monitoring ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The MS3xx Test Adapter is an advanced and versatile component, with a wide range of connector options, including circular connectors and high-density connectors. One of the key features of the test adapter is its contour which contains a spring-loaded contact pin for each contact in the connector, ensuring a secure and accurate electrical connection. The contour is automatically locked by the ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The MS5xx Test Adapter is a versatile interface between wire harnesses and measurement technology, and includes TSK Connect, which provides an advanced digitalization feature. The core benefits of using this new digital technology are significant time savings in project setups, increased flexibility, faster operational features, and improved productivity. The MS5xx Test Adapter offers an ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Zeta 620 assembly machine provides wires on two process models fully equipped for control cabinet construction – including labeling and terminals. Manual processes take time and require properly trained personnel. The Zeta 620 wire processing machine simplifies the wire assembly process. It produces complete parts lists fully automatically and sorts and labels the cables so that they ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Thanks to their five (Zeta 640) or eight (Zeta 650) process modules, Zeta 640/650 can process up to 36 wires without changeover, from batch size 1 and just-in-time. The Zeta machines assemble the required cables fully automatically on five (Zeta 640) or eight (Zeta 650) process modules from A to Z. The wire bundles are either already tied up or sorted in the correct order and prepared for further ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Thanks to their five (Zeta 640) or eight (Zeta 650) process modules, Zeta 640/650 can process up to 36 wires without changeover, from batch size 1 and just-in-time. The Zeta machines assemble the required cables fully automatically on five (Zeta 640) or eight (Zeta 650) process modules from A to Z. The wire bundles are either already tied up or sorted in the correct order and prepared for further ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Omega 740/750 wire assembly machine can be used to produce wire harnesses of various complexity and to equip them with terminal housings on one or both sides. Depending on the design, five (Omega 740) or eight (Omega 750) modules can be installed. This means that autonomous wire harnesses can be created in a short production time. The Omega series is manufactured for automated wire harness ...